|
|
 |
|
|
|
|
:::turntable
mods:::
:::sonic performance modifications:::
• STEREO SIGNAL
OUTPUT MODIFICATIONS
We offer a
multitude of output options especially designed for Producer, DJ or
Audiophile who desires more flexibility in equipment
integration.
These include:
1.
Phono Level to Line Level Conversion - $20
/ $50 / $80
We can convert the high sensitivity Phono
level output of a
normal
turntable to a Line level signal which will work on CD/LINE channels of
any mixer. This will also allow you to connect your Technics
1200/1210 directly into a computer sound card, or a Mini Bookshelf
Stereo system with an "Aux" input.
2. Analog Audio to Digital Audio Convertor - $80
Turn
analog audio signal to a digital audio data stream. Input is RCA and
Output
is either Coaxial (RF), or Toslink. 6v Power adaptor included!
3. Phono Breakout Box w/ Female RCA Connectors - $50
We
can attach a box underneath your Turntable
which will allow you to attach any set
of regular RCA cords. This is really cool and means you can choose
which cords you use. They will
not be hanging from your turntable, and when they do short out, or
become damaged, then its a snap to replace. We also supply RCA
wire cord sets with variying degrees of durability and performance.
4. RCA to any other Output Connector - $40 + parts
The
standard signal connector is terminated with RCA Male wire ends. We can
convert those to anything you desire
including:
• RCA
Female
• Balanced RCA Male
• XLR Male or Female
•1/4"
Male or Female
•1/8" Male or Female
•1/4" & 1/8" TRS Balanced
•Replacement RCA wire sets
We
proudly offer several great alternatives to the poor quality stock
factory RCA cables which came installed on your turntable.
All prices include both parts cost + professional installation labor
fee!
•
MONSTER CABLE ™ HIGH DEFINITION RCA WIRE SET
Cost_1 meter pair (3 ft.)_$80 2 meter pair (up to 6
ft.)_$100
These High
Definition High Performance Wire Sets feature Superior Dense Copper
Braid Shielding and
incorporate the patented XLN™ Noise Reduction technology with
DoubleHelix™ Construction that elimintaes electromagnetic low-frequency
inductively
coupled noise for improved Signal to Noise Ratios.
The Multi Gauge Balanced
Bandwidth Conductors feature Time Corrected Windings, as well as Pure OFC (Oxygen Free Copper)
Conductors and the construction boasts a Composite Molded Shell and
Strain
Relief under a Clear Duraflex™ Protective Jacket with quality you can
actually see with your eyes!
Featuring Balanced Twisted Pair Wiring as well as the Full Braided
Copper Shielding,
this signal cable easily rejects both EM (electro-magnetic) as well as
RF
(radio-frequency) interference .The Single Ended Shield Prevents Ground
Loops
which results in Superior Hum Rejection and Better Signal Path
Integrity.
Sounds Great to read, But what do you hear?
Nothing but the music.........Better
Highs, Midrange and Bass in a More Transparent Soundstage.
All packaged up
nice and neat in a stealth black metal connector and pure 24K Gold
Plated studio grade connectors and the Famous Monster Name that
has become a legend for
superior Audiophile Stereo Interconnects.
• ACOUSTIC RESEARCH ™ MEDIUM
DEFINITION RCA WIRE SET
Cost_1 meter pair (3
ft.)_$60 2 meter pair (up to 6ft)_$70
These
Interconnect Cables feature twisted pair construction wrapped in an
aluminum foil shield
terminated
with 24KGold Plated Molded Connectors. The result is an improvement
in output levels as compared with stock RCA cords due to an improvement
in signal to noise ratios. The inherant construction of the twisted
wire pair as well as the foil shielding blocks more noise to let more
signal come through from your phono cartridge to your speakers without
the added sonic coloration of the noise - RFI (Radio Frequency
Interference) where the RCA cords act like AM radio antenna , as
well
as AC (Alternating Current) Interference from power cords and power
strips.
Available in Metallic Blue jacket.
• TECHNICS ™ GOLD PLATED HIGH FIDELITY
AUDIO CORD
Cost_1 meter pair (3
ft.)_$60
The name on the cord says it
all...Technics high Fidelity Audio Cord! These high quality high
fidelity Gold plated RCA cords were previously only offered on the
special 25th and 30th anniversary edition turntables |: The SL-1200LTD
and the SL-1200M5G Grandmaster edition.
We have obtained a supply of them straight from the manufacturer in
Japan and can now offer them to you for upgrading many of the other
Technics turntable models. The design is top notch with oversize
channel signal and ground wiring in a sprial wrapped design to minimize
signal coloring and distortion due to RFI and AC interference. The
molded connectors are plated with pure 24K Gold to resist oxidation and
corrosion to ensure many years of trouble free service.
Terminated with easily identifiable red and white plug ends to insure
proper channel ID.
These will not be available forever so upgrade now while we have them
in stock.
• STELLAR LABS™ STANDARD DEFINITION RCA WIRE SET
Cost_1
meter pair (3
ft.)_$40 2 meter pair (up to 6ft)_$50
The Stellar Labs Value series
are high quality directional analog stereo interconnects ideally suited
for capturing the depth and detail in your favorite music program. The
dual conductor 90% spiral - wrapped cable helps protect against
unwanted noise and distortion and produces rich, defined bass tones,
warm midranges, and crisp clear high frequencies. Featuring 24K Gold
plated molded plug ends with a deep seated signal ground and deep
penetrating channel signal.
• GROUND WIRE ELIMINATION
Cost_$20
alone or just $10 with RCA Wire Set Purchase
That's
right.....we can totally eliminate that annoying Ground Wire. Its as
good as gone with our Ground Wire Elimination Service. No more dangling
Ground Wire to get tangled up, or caught up on everything. Enjoy a
clean, sleek, modern look without the hassle of a separate ground wire
that ends up shorting out or breaking and can be the cause of the
persistant humming you hear coming out of your speakers. Say
Sayanora...Adios!
• REVOLUTION ARMOURED GROUND WIRE SYSTEM™
Cost_$20
The REVOLUTION Armoured Ground Wire System™ is an
extremely strong wire
designed expressly for any user who never wants their ground wire to
break
or fray again..! This
braided steel ground wire is anchored to the metal chassis and not to
the
fragile PCB (printed circuit board) as is the usual case. This allows
the
ground wire alone to fully support the nearly 30 pound Technics SL-1200
MKxx
Turnable System by itself.
Check back for the amazing pictures of our single ground wire system
with a turntable dangling below it.
• INTERNAL TONEARM DAMPING INSULATION
Cost_$50
This
is a Popular Service for NiteClub and Heavy Sound Reinforcement
Applications
which require additional Vibration Isolation Measures due to Extreme
Low
Frequency Playback . In these Demanding Applications, Ultra-Low
Frequencies
resonate back through the Turntable Chassis and get Re-Amplified by the
Cartridge
and Tonearm, thereby causing LoudSpeaker Rumble in the region below
30hz.
This Amplification Loop is extremely difficult to troubleshoot, even
for
the trained professional, and the result is usually detenuation of
Sound
Pressure Levels in order to eliminate the situation. Since most High
SPL
applications require good clean loud undistorted sound, this action is
very
undesirable. We developed this system to create a solution to even the
most
difficult of Reverberation Problems you may face in your Niteclub, Bar,
or
Public Address System. This system is also a popular service for the
home studio, or living room concert hall as
the damping
action is eliminating the low frequency "arm - cartridge " resonance
which
in turn will brighten most any speaker system. This also lets the arm
mate
with a wider array of cartridges providing consistent bass performance.
as
well as a more solid feel when backcuing and scratching.
•
EXTERNAL TONEARM FLUID DAMPING SYSTEM Click Here for Pictures
Cost_$200
High Quality Audiophile
Turntables use a system in which a paddle attached to the Pickup
Assembly (Tonearm) is immersed in a special Damping Fluid.
The paddle rides in a high viscosity Silicone Fluid; controlling
sudden
movements of the Tonearm. It also helps suppress sound vibration within
the
Tonearm tube. The tonearm handles much better under manual cueing. The
needle
tracks warps without ever leaving the surface, even at elevated RPM's.
Many
repeat skips will now continue unabridged.
In use, the damping is eliminating the low frequency "arm
-
cartridge " resonance. This lets the arm mate with a wider array of
cartridges
while providing consistent bass performance.
DJ's take note that Fluid Damping will improve performance during back
scratching
and is is a kinder gentler approach to this technique than underhung
straight
tonearms which cause undue record wear and produce large amounts of THD
(Harmonic Distortion).
The fluid is exposed so it is best used in studio set ups. Sonically,
What
you will hear will be no less thatn amazing! Better Bass
Response,
More Intelligent Midrange, and Super Defined High Feequencies. Vastly
improves
Tracking on Warps as well as better tracing of Minute Music Detail.
On To Mechanical
Mods Page
Back to
Modifications Main Page
|
|
|
|
|
|
|
