|
|
 |
|
|
|
Our facility is
also your full
service center for Stereo DJ Mixing Consoles.
Mixer Repair, Mixer Reconditioning, and Custom Mixer Modifications
Done reasonably, professionally and with attention to detail.
We provide quality
service for the following brands:
:::mixer repair service:::
Cost_$ contact us for
quote on a specific repair
There is a $40 minimum service fee which includes
the 1st hour labor!
See
something on eBay that needs Repair - Maintenance - Parts -
Modification ?
We have a full line of
OE (Original Equipment) Factory Replacement Parts
If we do not have
it in stock, we will get it for you fast!
Fader out?
No Power?
Knob missing?
Channel Drop?
Channel Static?
Switch Broken?
:::mixer
recondition service:::
Cost_$40 for all
2 Channel Mixers
Cost_$50 for all 3 Channel Mixers
Cost_$60 for all 4 Channel Mixers
|
 |
|
Here's what it includes:
FIRST >
I open the machine up and thoroughly blow out all
the accumulated dust, gunk, and debris!
SECOND >
I clean all the PCBs (Printed Circuit Boards)
& Power Supply with Cleaner/Degreaser
This removes all oxides and smoke particulates which form and deposit
on
the diodes / transistors /ICs / logic chips (such as the DSP)
THIRD >
I Clean out and then relubricate all rotary fader
knobs & switches (trim,bass,mid,treble,mic,effect,
phono/line,headphone,etc...) this really improves the static you may
notice
as the audio DOES go straight through the eq section of your mixer!
FOURTH >
I will go through and tighten all the rotary
knobs...
What will happen to you if you let
these get loose is that the solder points will crack and the fader will
start to exhibit problems such as the inability to
control, or static & distortion
during
playback.
FIFTH >
I clean & deoxidize all the inputs &
outputs including:
Headphone
RCA Phono / Line inputs
RCA + 1/4" + XLR - Master / Record / Booth Outputs
Mic inputs
SIXTH >
I treat all Inputs + Outputs to a special
condtioning spray
This coating imparts the following benefits:
•Improved Signal Conductivity
•Reduction in Oxidation + Corrosion
•Reduction in wear + abrasion
•Reduction in arcing & RFI(Radio Frequency Interference)
•Reduction in Intermittent connections between dissimilar metals - ie
gold & nickel plate
SEVENTH >
I then test all
Mixer functions to make sure everything is working correctly and then
return the unit to you..
:::mixer
modification service:::
:: SYSTEM LED COLOR
CHANGES ::
Cost_$2 per LED
Install_$3 per LED $40 is the minimum fee for
any machine
We can change out the
standard color LEDs with your choice of many other brilliant colors
including:
- Pure White
- Super Blue
- Super Red
- Super Green
NOTE: All LEDs may be
changed including Effect Enable Button in PIONEER DJM series as well as
the VU Output level meters!
NOTE: Package deals on LEDs and
LED installation are available to save you $ on large orders!
:: MULTIPLE GROUND
POINTS ::
Cost_$5 per Ground Post
Install_$10 Per Post
Most Mixing Consloes come with just one Ground
Point
It is rather difficult to connect two Ground wires together to one post.
We can add Grounding Points to the back of your mixer.
This enables you to more easily connect the ground wires of two DJ
turntables.
|
|
|
|
