|
|
 |
|
|
:::Turntable
Maintenance:::
|
|
Think of is
as a Tune-Up
for your Turntable!
We can make your older decks operate better than new ... guaranteed !
All you need to do is choose which level you need
We will take you there !
(all prices are per
turntable)
LEVEL1MAINTENANCE_$40
- Tonearm Adjustment
- Exterior Cabinet
Cleaning
- Channel Contact
Cleaning
- Recalibration
of Zero Point
- Lubrication
of Turntable Platter Assembly
- Recalibration of
Pitch
Scale to Factory Setting
- Cleaning
& Lubrication of all Control Switches
- Gimble Bearing
Lubrication
(lateral & vertical)
- Motor & Motor
Spindle
Cleaning & Lubrication
- Setting Cartridge
Tracking
Force (cartridge must be
incl.)
- Custom Setting of Anti
- Skating (cartridge must
be
incl.)
- Reapplication
of Heat Sink Compound to Power Supply Transistor
- Cleaning &
Deoxidation
of All 5 Printed Circuit Boards
- Main Drive
Board
- RCA to Tonearm
- Pitch Control VR
- Speed Controls
- Power Supply
LEVEL2MAINTENANCE_$60
- The Level
One Maintenance
+ PLUS:
- Complete Pitch Control
Rebuilding
The entire Pitch
Control
Assembly gets Very Dirty!
Dirt gets into the Pitch Control by way of the felt slit in the Pitch
Slider Assembly and gets into every part of the Pitch Control...Its a
mess!
Pictures of the inside of a
Pitch
Control Assembly....this could be yours!!
  
The Pitch Fader Conducting Feet are configured similar to the teeth of
a
comb to make the best contact possible with a circuit track it
runs
up and down as the Pitch Control is manipulated.
What happens is that the fader "Teeth" pick up all sorts of gunk
and
debris; this ends up changing the resistence in the Circuit.
This ends up making it difficult for you to accurately control
the
Platter Speed, and reduces your ability to make preceise adjustments in
Pitch.
Now on to what we do......
- We Dissassemble
and
Inspect the entire Pitch Control for Mechanical Damage
- Then, we Clean &
Deoxidize
all the Contacts and Internal Circuit Boards
- Next, we remove all
traces
of Factory Lube and Relubricate with superior TEFLON Lube
- Then at your request
we
are able to take out the Zero Detent (Zero Click) for super smooth
action
just like the new Technics M3D & MK5 series !
- Finally, we'll
even
disable the Quartz Lock if you want
to
put an end the the "Dreaded Dead Zone" ... so called because platter
control
is compromised between -1 and +1 especially on Technics
SL-1200MK2 models: see FAQ
Why disable the QUARTZ Lock
Now look at the
same
Pitch Fader & Pitch Fader Track after a thorough cleaning!
  
LEVEL3MAINTENANCE_$80
- All the Above Maintenance
Services
PLUS:
- A New OE Technics
Pitch
Control Unit ... a $50 service by itself !
All install labor is included in this fantastic deal !
You may specify Zero Detent (Zero Click) be removed at no additional
charge
!
You may also specify to have the Quartz Lock Disabled at no additional
charge
!
LEVEL4MAINTENANCE_$90
- All the Above Maintenance
Services
PLUS:
- A new OE Technics Neon
Pop-up Stylus Illuminator Lite , Or a $20 credit toward the LED Stylus
Illuminator
Conversion.
LEVEL5MAINTENANCE_$100
- All the Above
Maintenance
Services PLUS:
- A new OE Locking
Tonearm
Rest ... a $20 service by itself !
CARTRIDGE SERVICE
$20 alone or just $10 with any Maintenance
Level
Complete Service for the
Cartridge
& Stylus !
- Alignment of Cartridge
Overhang
- Cleaning &
Deoxidation
of Cantilever
- Cleaning &
Deoxidation
of Stylus Tip
- Inspection of Stylus @
150x
magnification
- Alignment of Cartridge
Tracking Thrust Angle
- Resistence Measuring
of
Cartridge Channel Wires
- Cleaning &
Deoxidation
of Headshell Channel Contacts
Go To
Turntable
Modifications Section
Return to
Turntable Main Menu
|
|
| |
|
|
|
|
