HOME
TURNTABLES
CD   PLAYERS
MIXERS
PARTS STORE
KNOWLEDGE
FORUM
LINKS
CONTACT
SHIPPING
PAYMENT FAQ



 Digital CD Players            

  Our facility is also your full service center for DJ CD Players.

  We offer Replacement Parts, Repair, Reconditioning, and Custom
 
Modifications for both Digital CD Turntables as well as Dual CD Systems.

 
All work is done reasonably, professionally and with attention to
  detail.

 
We never charge you for diagnosis as some other shops do.

  They call it a "bench fee" or "tech fee" and it is usually $60 - $80 for them to tell you
  what the problem is after you have just told them what the problem is.....

  This fee usually does not even go toward the repair of the problem you told them about.

  This makes no sense whatsoever.

 
 
 Make & Models Repaired

 Pioneer Electronics
 CDJ 100 / CDJ 200 / CDJ 400 / CDJ 450 / CDJ 500
 CDJ 700 / CDJ 800 / CDJ 1000 / CDJ 900 / CDJ 2000

 Denon Electronics
 DN-S700 / DN-D4500 / DN-D6000 / BU4500
 DN-S3500 / DN-S1000 / DN-S3000 / DN-S5000
 DN-DN4000 / DN-D9000 / DN-2100F / DN-2600F
 DN-1800F / DN-2000 / DN-2500F / DN-2700 / DN-4000


 
:::player repair service:::

 
Cost_$ 

  contact us for quote on a specific repair

 
 
See something on eBay / Craigslist that needs
  Repair - Maintenance - Parts - Modification ?


  We have a full line of  OE (Original Equipment) Factory Replacement Parts
  If we do not have it in stock, we can get it for you.
 
 
 
No Power ?
  Error Codes ?
 
Pitch Control ?
  Knobs missing ?
  Channel Static ?
  FL Display Out ?
 
Channel Dropout ?
  JOG Dial Problems ?
  Drink / liquid Spills?
  Switch / Button Broken ?
 


 
:::player maintenance service:::
 This service is for CDJs with normal service wear and not for drink / liquid spills.
 


 PIONEER CDJ 1000  MK1 • MK2 • MK3  Maintenance Service
 

 PIONEER CDJ 800  MK1 • MK2   Maintenance Service

 Includes complete cleaning, pitch recalibration and replacement of Play/Pause & Cue switches!
 

 Cost_$100

 
Here is what this service includes:

  FIRST >
 
We open up the unit and thoroughly blow out all of the accumulated dirt and debris...

 
SECOND >
  We clean the  PCB (Printed Circuit Boards) using a chemical cleaner

 
THIRD >
 
We dissassemble the laser lens assembly and professionally clean the laser lens
  using factory PIONEER cleaner and cleaning cloths.
 

  FOURTH >
 
We lubricate the lens drive motor as well as the CD insert / eject mechanism
  using factory PIONEER supplied lubricants.
 
 
  FIFTH >
  We clean out all control switches and rotary variable resistors
 
We replace the two heavily used switches (Play/Pause & Cue) using new factory parts


 
Sixth > 
 
We recalibrate the Tempo (Pitch) to factory recommended setting


  SEVENTH >
 
We clean and deoxidize all RCA signal outputs - Analog & Digital
 

 
EIGHTH >
 
We reassemble the unit and thoroughly test each function via factory SERVICE mode
  checking the following areas :

 • Checking & Updating  software for  MAIN / SUB / DRIVE. (800MK2 / 1000Mk3)
 • Check and report error history.
 • Check all control buttons and display functions.
 • Checking load on JOG dial.
 • Checking operation of player simple substance in " Player" and "Test" modes.

 

 Additional Services

  Rebuilding of the JOG platter assembly (Pioneer CDJ 400/800/900 & CDJ 1000/2000 only)
 
This service is for CDJs with normal service wear and not for drink / liquid spills.
  
 Includes :

 Cleaning of JOG Sensor Wheel
 Cleaning of Platter Sensor Switch
 
Cleaning of Platter Bearing Assembly
 Cleaning & Relubrication of JOG A and JOG B Rollers (MK2 & Mk3)
 Cleaning & Relubrication of slip sheet Assy (CDJ 1000 MK1 Original only)
 
 


 
Cost_$40


 

 
:::player replacement parts:::

 
email with your model for details...











© copyright 2010 | fullcircle interactiv | all rights reserved